Product Information

Restoration

Wood ReNew™

M-Balm™

PCSI S-100

Eazy Strip

OxCon™

Log Wash ™

Abatron LiquidWood®

Abatron WoodEpox®

Wood ReNew™

Wood ReNew is a biodegradable, non-toxic, percarbonate-based wood cleaner that brightens grayed and weathered wood. Use it to return all wood to its original natural color before applying LifeLine finishes.

Wood ReNew removes UV graying, dirt, mold, mildew, grease and water stains from most wood surfaces.

Wood ReNew works fast and is easy to apply. Wet down the surface you intend to treat, then mix the concentrate with water, stir and spray on. Wood ReNew will begin to fizz and foam immediately, as it eats away dirt and grime. In about ten minutes, scrub the wood with a medium-bristle brush and rinse off.

1 Gallon (makes enough to clean 2500 to 3200 sq. feet)

$59.95

M-Balm™

M-Balm epoxy liquid penetrates deeply into porous, deteriorated, dried-out or spongy wood, curing and hardening into a strong, water-resistant mass that includes both the original wood fibers and the epoxy mixture.

The more M-Balm used, the stronger the restored wood member will become. It consolidates the decayed area in preparation for use with E-Wood.

1. Mix two parts M-Balm epoxy with one part hardener.
Mix only what can be applied in 30 minutes.
2. Apply to affected area with applicator squeeze bottle.
Repeat if necessary.
3. In extreme cases, drill holes into the decayed wood and pour liberally into the affected area.

E-Wood™

E-Wood is a putty-like, non-shrinking, epoxy filler used to fill in missing sections of logs or dimensional wood members.

E-Wood will form a permanent bond to most rigid surfaces. Porous surfaces should always be treated with a compatible, low viscosity epoxy system such as M-Balm. Use E-Wood to replace missing sections of window sills, frames, furniture, or any wood structure.

Use it to add new sections to completed structures.

After repair with E-Wood, restored wood can be shaped with your normal wood working tools, including saws, sanders, planes, routers and drills.


1. With disposable gloves, combine E-Wood epoxy and hardener. Do not mix more than can be applied in 15 minutes.
2. Apply over wood that has been treated and sealed with M-Balm. Mold to rough finished shape.
3. When cured, sand, nail, carve, paint or stain as desired.

PCSI S-100

Perma-Chink Systems developed a finish remover using new technology originally developed for removing paint from aluminum aircraft surfaces.

S-100 Finish Remover is an environmentally friendly water-based solvent that removes many oil and water-borne finishes from logs, siding, and decks. Supplied as a ready-to-use gel, it is easily applied with a short bristled brush, paint roller, or airless sprayer. Within a few minutes it begins to soften the finish and since it is a gel, it stays wet and active for a fairly long period of time. Once the finish has sufficiently softened, it can be removed by simply pressure washing.

S-100 will not darken or discolor the wood, will not corrode or discolor metal surfaces, nor will it harm log home chinking or sealants. Although it is effective for removing most log home finishes, there are some high performance coatings that may require a more aggressive chemical stripper. Perma-Chink Systems recommends that a sample of S-100 be obtained from them and tested on the finish you want to remove prior to placing an order.

Eazy Strip

Eazy Strip Safe and Effective Finish Remover Use EZ Strip and your pressure washer to remove even the most stubborn finish system. Its special formula contains no harsh chemicals and is bio-degradable. EZ Strip is safe and easy to use and unlike caustic striper, will not darken or discolor the wood. Clean up is a snap with just soap and water.

OxCon™

Oxcon is an easy, do-it-yourself blonding agent, designed to clean away grime and brighten up wood surfaces of exterior/interior logs, deck boards, railings and fences. This powerful blonding agent works to return gray weathered wood to its natural golden color, before to using water-resistant finishes or semi-transparent stains.

Oxcon may be applied with a sprayer, roller, brush or broom. Use liberal amounts (a flowing coat) over a specific area. Do not spot-treat since this method of application could cause blotching. Let the solution sit on the surface for 10-15 minutes, then rinse with plenty of water. Apply from bottom up and rinse from top down.

Oxcon contains oxalic acid that works to revive your woodwork, giving your wood a fresh, natural look.

Log Wash ™

Periodically cleaning an exterior finish is an important step in maintaining the appearance and durability of a stained surface. The exterior surfaces of a log home are a settling ground for dust, pollen and other airborne contaminants that dull the surface and encourage mold growth. A light cleaning once or twice a year will keep a home looking beautiful and helps prolong the life of the exterior finish.

Log Wash is designed to remove dirt, grime, pollen, and surface mold and mildew without harming the wood or the finish as long as the finish is in good condition. If during the washing process you notice areas where the stain or topcoat is coming off, it is probably time to apply a new coat of stain or topcoat. Request a copy of “Caring For Your Dream Home” from any Perma-Chink Systems office for information about applying and maintaining LIFELINE stains and finishes.

Log Wash:

• Removes dirt, dust, and pollen from log surfaces.
• Will not harm finishes that are in good condition.
• Is safe to use on chinking and sealants.
• Is environmentally friendly.

Abatron LiquidWood®

Liquid wood consolidant. Reinforces, rebuilds, water- and insect-proofs wood by hardening after penetrating. Regenerates rotted windowsills, frames, structural and decorative parts, furniture, boats, columns, floors. Primer for WoodEpox.

LiquidWood consists of 2 clear liquids: the resin (A), and the hardener (B). When A and B are mixed by simple stirring, a blend is formed with unusual properties to impregnate and restore wood and other porous masses.
LiquidWood is brushed or poured on the surface where it must be absorbed. The more porous the wood, the more resin it will absorb, and the greater the improvement. LiquidWood impregnates the wood fibers and hardens into a water- and insect-resistant, distortion-free, high-strength mass in hours or minutes. The hardened mass can be sawed, planed, routed, carved, drilled, sanded, glued and painted.

LiquidWood is also a primer and surface consolidant on rotted and porous surfaces, for subsequent applications of WoodEpox, paints or glues. For sound surfaces that require no consolidation, PrimKote primer is mostly used. The preparation with LiquidWood creates a proper interface on porous masses, a strong receptive surface for adhesion on most areas.
LiquidWood is designed to impregnate and reinforce fibers and other absorbent masses. That is: holes, cracks or other voids are best filled with WoodEpox, after impregnating and priming the existing fibers with LiquidWood. The combination of these two products offers superb results unequaled by any other restoration material.

TYPICAL APPLICATIONS:
Rotted, dried-out or spongy windowsills - thresholds - window and door frames - columns - posts - stair steps - railings - balustrades - indoor and outdoor furniture - porches - gazebos - stages - platforms - balconies - countertops - cornices - capitals - entablatures - structural and decorative components - walls - mouldings - doors - shutters - artifacts - archeological and art restoration - protective impregnation.

Structural adhesive putty and wood replacement compound. Most versatile, high-strength no-shrink adhesive paste to fill, repair and replace wood and other materials in structures, walls, floors, furniture, sculptures. A new standard in workshops, plants, buildings, museums, shipyards and homes. Unaffected by water and insects.

WoodEpox is a light-weight structural adhesive putty system and wood substitute consisting of 2 components: resin paste (A) and hardener paste (B). When A and B are mixed, the blend hardens within 1-2 hours into a lighter-than-water non-shrinking, tough adhesive mass with high dimensional stability, chemical, water, heat and weather resistance. Its appearance is a light neutral color that can be changed, while mixing, with stains, dyes or pigments. It has a no-slump paste consistency that allows it to be applied like putty to fill gaps, holes, or to build up virtually any thickness and shape.

WoodEpox offers unique properties:

* It bonds permanently with high strength to most rigid surfaces.
* It fills cracks, holes and voids of any size without the shrinking and crumbling typical of common wood fillers.
* It can replace or add missing or new sections in window frames and sills, furniture, sculptures, structural and decorative components indoors and outdoors.
* Because of its strength and durability, it is as different from conventional wood fillers as a permanent solution from temporary remedies.
* It can be sawed, nailed, planed, sanded, machined, carved, stained, painted like wood.

Large and small holes or cracks, missing corners, edges, depressions can be filled, replaced or restored by adding the WoodEpox paste by hand, spatula, knife or trowel. The material becomes a permanent part of the surface to which it is applied. It bonds equally well to wood, ceramics, concrete, metal, glass, fiberglass and most rigid materials.

Plastic film, masking tape, contact paper, wax-coated plywood, other sheets or shapes can be used to level or mold the freshly applied mass until it hardens. Furthermore, unshaped WoodEpox masses can be easily carved, cut, sawed, planed and otherwise worked after the material has hardened.

WoodEpox can also be sculptured by hand into any shape, before hardening. Besides the obvious use for sculptors, another interesting application is shaping handles, knobs, larger-sized or modified handling devices for handicapped people. When the shaped WoodEpox is applied to the intended surface, it bonds permanently as it hardens.

TYPICAL APPLICATIONS:
Damaged, cracked or broken windowsills - thresholds - window and door frames - columns - posts - stair steps - railings - balustrades - indoor and outdoor furniture - porches - gazebos - stages - platforms - balconies - countertops - capitals - entablatures - structural and decorative components - walls - mouldings - doors - shutters - artifacts - archeological and art restoration - sculptures - protective filling and resurfacing - models - patterns - mock-ups - handles - knobs - all kinds of shapes.